Description
Characteristics：
1. Fast drying:5-15minutes for table drying, thoroughly dry after 1-2 hours for painting, essential for small area for repairs.
2. Strong adhesion between layers, small area spraying can replace the spray gun primer, easy to handle.
3. No grinding or easy grinding: after spraying, the paint surface is smooth and fine, which can be done without grinding or with slight grinding, also reducing the cleaning, spraying and polishing steps of a spray gun and saving time and effort.
4. It can be filled with 240 # sandpaper, the sand hole without shrinking, sinking or penetrating the bottom.
5． Small sand holes can be used instead of the red putty.
6．Make the finish/color paint show excellent fullness and hardness effect, and reduce the amount of finish paint, to achieve twice the result with half the effort.
Application:
It commonly used in putty, PP plastic or cured paint so as to bond the color paint or top paint, achieve the fast repair.
Instruction:
1. Grinding with 800# sandpaper and clean the surface, keep it dry, while cover the non-spray area.
2. Shake the can for at least 2 minutes for the mixing ball rattles up and down.
3. Keep the nozzle 18-25 cm above surface as you spray. Press it and spray evenly.
4. Make sure to shake the can frequently for smooth spraying.
5. Use thin spray for multiple times（every 2-3minitues or until dry to touch), then spray the color paint or varnish after thoroughly dry.
After use, invert the can and spray for 5 seconds to clear valve and prevent the nozzle clogging.